CompAir CF and CompAir X Range Filters
CompAir CF Filters
A natural process in Compressing Air is it will often be contaminated with dust, dirt, particulates, and oil in varying concentrations. This problem can be removed by using the correct specified filters. Filters are often setup in multistage, to capture the various contaminants. Fibre filters can only trap oil as droplets, while more efficient active carbon can trap oil as a vapour. Our standard CF Series filtration from 1 micron; up to and including Bacteria, Sterile, and Oil Free protection.
CompAir CF Filters range are available in 5 filter media variants. We can help you select the right filters for your needs and requirements,
CF Filter series B: High Efficiency General Purpose Protection: Particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6 mg / m 3 at 21 °C / 0.5 ppm(w) at 70 °F.
CF Filter series C: High Efficiency Oil Removal Filtration: Particle removal down to 0.01 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.01 mg / m 3 at 21 °C / 0.01 ppm(w) at 70 °F.
CF Filter series D: Oil Vapour & Odour Removal: Maximum remaining oil vapour content: 0.003 mg / m 3 at 21 °C / 0.003 ppm(w) at 70 °F.
CF Filter series E: General Purpose Dust Filtration: Dry particle removal down to 1 micron.
CF Filter series F: High Efficiency Dust Filtration: Dry particle removal down to 0.01 micron.
Untreated Compressed Air and contamination from dirt particulates, oil, water and bacteria can lead to:
- Pipe scale and corrosion within pipework and pressure vessels
- Damage to production equipment, air motors, air tools, valves and cylinders
- A multitude of equipment reliability, efficiency and product contamination issues and wastage
The CompAir CF Series Filtration range provides you unrivalled energy and filtration efficiency and performance to provide peace of mind however demanding your air quality requirements.
Click to download the CompAir CF and X Filters PDF.
CompAir X-Range Water Separators
Water separators remove bulk liquids such as condensate, water and liquid oil from the air flow through directional and centrifugal separation.
Installed before a coalescing filter the water separator can provide added protection against bulk liquid contamination enabling the filter to operate more efficiently. The X water separator range from CompAir can operate across various flow conditions and have been optimised to reduce differential pressure, increasing efficiency, with very low maintenance.
The CompAir X-range of water separators provide bulk condensed water and liquid oil removal and are used to protect coalescing filters against bulk liquid contamination.
- 0.6 – 432 m³/min
- 21 – 14885 cfm
Click to download the CompAir CF and X Filters
No products were found matching your selection.